Removing and installing parts of the cooling system
Removing and installing parts of the cooling system
Important Hot steam can escape when opening cap on expansion tank: Cover cap with a cloth and open carefully.
Notes:
-
◆ When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work.
-
◆ Secure all hose connections with the correct hose clamps (same as original equipment):
=> Parts List
-
◆ Hose clamp pliers V.A.G 1921 or spring clamp pliers VAS 5024 A are recommended for use in installing spring clamps.
-
◆ Replace seals and gaskets.
-
◆ The arrow markings on the coolant pipes and on the ends of the hoses must align.
|