Audi Workshop Service and Repair Manuals

Removing

• ● Ribbed belt must be removed =>Page 13-9.

• ‒ → Unbolt vibration damper.

Note:

To loosen and tighten the vibration damper counterhold with ring spanner on central bolt.

Installing

Installation is carried out in the reverse order; note the following:

• ‒ Only use new bolts to secure.
• ‒ → When installing vibration damper, use only original bolts:

=> Parts List

• ‒ Can only be installed in one position. The hole -arrow- in the vibration damper must fit over the projection on the toothed belt sprocket.
• Tighten bolts of vibration damper to 10 Nm + 90° (1/4 turn).