Audi Workshop Service and Repair Manuals

Removing

• ‒ → Remove the noise insulation -arrows-.

• ‒ → Unbolt heat shield for right drive shaft -arrows-.

• ‒ → Unbolt bracket for exhaust system from assembly mounting -arrows-.

Note:

The isolating element in front exhaust pipe must not be deflected more than 10°to avoid damage.

• ‒ → Unscrew securing bolts -arrows- of front exhaust pipe/exhaust turbocharger.

• ‒ → Detach the exhaust system at the clamping sleeve -arrows-.
• ‒ Remove front exhaust pipe with catalytic converter.

Installing

Installation is carried out in the reverse order; note the following:

Note:

Always replace seals, gaskets and self-locking nuts.

• ‒ Stress-free alignment of exhaust system

Tightening torques