audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing sealing flanges and dual-mass flywheel > < Positioning crankshaft at "TDC” with engine installed

A3 Mk1

Positioning crankshaft at “TDC” with engine removed
Positioning crankshaft at “TDC” with engine removed
   
Procedure
l  Toothed belt cover (top section) removed
–  Turn crankshaft at central bolt on crankshaft sprocket in direction of engine rotation to “TDC mark”-arrows-.
  A13-0154
l  At the same time the marking on the front of the camshaft sprocket must align with the marking on the rear toothed belt cover -arrows-.
–  Rotate crankshaft one turn further if necessary.
  A13-0377

Removing and installing sealing flanges and dual-mass flywheel > < Positioning crankshaft at "TDC” with engine installed