Audi Workshop Service and Repair Manuals > A3 Mk1 > Power unit | 4-Cylinder engine (2-valve), Mechanics | Engine assy,cylinder block,crankcase | Adjusting assembly mountings

Checking

–	Take off engine cover panel -arrows-.

–	Detach coolant expansion tank -1- and power steering reservoir -2-. Hoses remain connected.

Note

Activated charcoal filter -3- remains installed.

The following specifications must be obtained:

l	Both bolt heads -b- must be flush with the edge of the support arm -2-.

l	The distance -a- between engine mounting -1- and support arm -2- of the right engine mounting must be 13 mm.

Note

Distance -a- = 13 mm can also be checked with a metal rod of suitable size, or similar.

Audi Workshop Service and Repair Manuals