audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Oil filter, oil filter bracket - exploded view of components > < Removing and installing sump

A3 Mk1

Removing and installing oil pump
Removing and installing oil pump
   
Removing
–  Remove sump and baffle plate → Chapter.
–  Remove bolt -2-.
–  Pull chain sprocket off oil pump shaft.
–  Unscrew bolts -1- and -3- and remove oil pump.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert dowel sleeves → Item at top of oil pump.
l  Installation position: Chain sprocket can only be fitted in one position on oil pump shaft.
–  Install sump → Chapter.
Tightening torques
  A17-0209
ComponentNm
Chain sprocket to oil pump shaft20 + 90° 1)2)
Oil pump to cylinder block16
l  1) Renew bolt.
l  2) 90° = one quarter turn.

   

Oil filter, oil filter bracket - exploded view of components > < Removing and installing sump