A3 Mk1
Mechanical accelerator mechanism - exploded view |
Left-hand drive vehicles |
1 - | Throttle cable |
q | Removing and installing → Chapter |
q | Adjusting by re-positioning locking element at retainer → Chapter |
2 - | Locking element |
3 - | Accelerator pedal |
4 - | Spacer bush |
5 - | Bearing bush |
6 - | Washer |
7 - | Stop bolt |
8 - | Nut |
q | 20 Nm |
Right-hand drive vehicles |
1 - | Bearing bush |
2 - | Throttle cable |
q | Removing and installing → Chapter |
q | Adjusting by re-positioning locking element at retainer → Chapter |
3 - | Operating rod |
q | With accelerator pedal |
q | To remove, lift locking lever on bearing bush -item 4- and turn bush |
4 - | Bearing bush |
q | With securing tab |
q | To remove operating rod -item 3-, lift locking lever on bearing bush and turn bush |
5 - | Pedal rubber |
6 - | Accelerator pedal stop |
7 - | Nut |
q | 10 Nm |
8 - | Cover |
q | For operating rod |