Caution First release retainer tabs on connector contact before detaching electrical connectors on fuel gauge sender -G-. |
|
–
| Release connector tabs on wires -3- and -4- and pull off. |
–
| Lift retaining lugs -1- and -2- with a screwdriver and pull fuel gauge sender -G- off downwards -arrow-. |
Installation is carried out in the reverse order; note the following: |
–
| Insert fuel gauge sender -G- into guides on fuel delivery unit and press upwards until it clicks into place. |
–
| Attach connector tabs and check that they have engaged properly. |
–
| Install fuel delivery unit → , connect battery and perform steps required after re-connecting battery → Rep. Gr.27. |
|
|
|