Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Wiring and component check with test box V.A.G 1598/22 >
< Technical data
A3 Mk1
Power unit
Motronic injection and ignition system (4-cyl.)
Mixture preparation system, electronic inj.,Gas / Servicing Motronic injection system
Fitting locations overview
Motronic Injection and Ignition System (4-cyl.)
Servicing Motronic injection system
Fitting locations overview
Activated charcoal filter solenoid valve 1 (N80)
4 pin connector
◆
For Lambda probe and Lambda probe heating
◆
Located on underside of car on right-hand side
Intake air temperature sender (G42)
Throttle valve control part (J338)
Engine control unit (J220)
Camshaft adjustment valve (N208)
Air mass meter (G70)
Coolant temperature sender (G62)
Fuel pressure regulator
Injector (N30...N33)
Ignition coils (N and N128) with output stage (N122)
Engine speed sender (G28)
Knock sensor 2 (G66)
3 pin connector
◆
For knock sensor 2
Knock sensor 1 (G61)
3 pin connector
◆
For engine speed sender
3 pin connector
◆
For knock sensor 1
Hall sender (G40)
Power unit
Motronic injection and ignition system (4-cyl.)
Mixture preparation system, electronic inj.,Gas / Servicing Motronic injection system
Fitting locations overview
Wiring and component check with test box V.A.G 1598/22 >
< Technical data