Checking throttle valve module -J338- |
The housing for the throttle valve module contains the following components: |
t
| Throttle valve drive (electric power control) -G186- (this is an electric motor which is actuated by the engine control unit; it overcomes spring force to open the throttle valve). |
t
| Throttle valve drive angle sender 1 (electric power control) -G187- |
t
| Throttle valve drive angle sender 2 (electric power control) -G188- |
Note t
| The housing for the throttle valve module must not be opened. |
t
| The angle senders take the form of potentiometers (variable resistors). They inform the engine control unit of the position of the throttle valve and are completely independent of each other. |
t
| The potentiometers cannot be mechanically adjusted. The settings are made in the Basic setting mode using vehicle diagnostic and service information system -VAS 5052-. |
Perform adaption of throttle valve module → Chapter. |
|
|
|