audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Checking actuation > < Checking switch
Checking voltage supply
Checking voltage supply
   
–  Connect voltage tester -V.A.G 1527 B- as follows:
  A24-0200
Connector
Contact
Measure against
2body earth

–  Switch on ignition.
t  LED must illuminate
If the LED does not illuminate:
–  Check the wiring of contact 2 between connector and fuse for open circuit/short to earth. → Current flow diagrams, Electrical fault finding and Fitting locations
If the LED illuminates:
   

Checking actuation > < Checking switch