audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Readout specifications for data bus - vehicles with 74 kW engine > < Readout specifications for engine power output - vehicles with 74 kW engine
TDI®injection and glow plug system (4-cyl. unit injector)
Reading measured value block (data block)
Readout specifications for charge pressure control - vehicles with 74 kW engine

Display Group 011 at full throttle (road test, coolant temperature not below 75°C)

Important: Always observe safety precautions => Page 01-1.

Important: Observe rules for road test at full throttle => Page 01-89.

Display group 11

◂ Indicated on display

XXXX rpm

XXXX mbar

XXXX mbar

XX %

◂ Display zones 1 ... 4

Duty cycle (activation) of charge pressure control solenoid valve -N75: 45 ... 80% okay

Current charge pressure 1850 ... 2250 mbar: okay
▪ < 1850 mbar or > 2250 mbar:
▪ Charge pressure control defective, turbocharger defective => test6)

Charge pressure specified by control unit: 1900 ... 2100 mbar okay
▪ > 2100 mbar: charge pressure increased as a result of tuning

Engine speed: 2800 ...3200 rpm

6) Testing charge pressure control:

Readout specifications for data bus - vehicles with 74 kW engine > < Readout specifications for engine power output - vehicles with 74 kW engine