Replacing gas-discharge lamp for dipped beam (gas-discharge headlight)
Electrical system
Servicing headlights - up to Model Year 2000
Replacing gas-discharge lamp for dipped beam (gas-discharge headlight)
Attention: High voltage Always disconnect battery earth strap before working on gas-discharge headlight components marked with yellow high-voltage symbols.
Removing
‒ Remove headlight .
‒ Detach cover from headlight housing.
‒ → Unplug connector -1- at gas-discharge lamp by turning anti-clockwise -arrow-.
‒ → Detach retaining ring -1- for gas-discharge lamp by turning anti-clockwise -arrow-.
‒ Pull gas-discharge lamp out of headlight housing.
Installing
Install in reverse order, paying attention to the following:
Notes:
◆ Heed installation position: Lug at top of bulb holder must engage in recess of bulb.
◆ Retaining ring can only be fitted in one position.
‒ Insert new bulb in housing, taking care not to touch glass bulb with bare hands.