audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear parking aid sender > < Removing and installing parking aid control unit -J446

A3 Mk1

Electrical system
Servicing parking aid
Removing and installing rear parking aid warning buzzer -H15

Fitting location: At rear left of luggage compartment beneath side trim
 
A94-0161

Removing

  • ‒ Open left luggage compartment storage area.
  • ‒ Unplug connector.
  • ‒ → Unscrew bolts -3- and detach holder -2-.
  • ‒ Unscrew nuts -4-.
  • ‒ Lift out warning buzzer.

Note:

Fig. shows 3-door model.

Installing

Install in reverse order.

Tightening torques

Component

Nm

Parking aid warning buzzer to holder

1.5

Holder to body

1.5

Removing and installing rear parking aid sender > < Removing and installing parking aid control unit -J446