Audi Workshop Service and Repair Manuals

• Fluid hose
• Securing nut, 8 Nm
• Wiper motor
• Rubber seal

Removing

• ‒ Remove rear wiper .
• ‒ Remove trim at bottom of tailgate.

=> General Body Repairs, Interior; Repair Group 70

• ‒ Unplug connector.
• ‒ Carefully pull fluid hose -1- off connection pipe.
• ‒ Unscrew securing nuts -2-.
• ‒ Detach wiper motor -3-.

Installing

Install in reverse order, paying attention to the following:

Note:

Carefully insert rubber seal -4- in hole in rear window.

• ‒ Tighten securing nuts -2- (8 Nm).
• ‒ Fluid hose must be heard to engage in spray jet connection.