Audi Workshop Service and Repair Manuals

• ‒ Allow wiper motor to run into park position.

• ‒ → Check whether wiper blades rest on marks -1- on windscreen in stated position.
• ‒ Check whether distance between ends of wiper blades and water deflector at bottom edge of windscreen is as follows:

Note:

Dimensions indicate distance between wiper blades and cowl panel grille of plenum chamber at bottom edge of windscreen.

• ‒ Tighten securing nuts for wiper arms to 16 Nm.
• ‒ Actuate flick wipe function.
• ‒ If necessary, align wiper arms again and tighten securing nuts.