Audi Workshop Service and Repair Manuals

Notes:

• ◆ Final control diagnosis can only be performed with engine stopped and ignition switched on.
• ◆ If final control diagnosis detects a fault, locate and eliminate cause of problem.

Test requirement:

• ● Dipped beam on

Sequence of operations

• ‒ Start automatic headlight range control self-diagnosis=>Page 01-484.

→ Display on VAS 5051:

• ‒ From list -1- select diagnosis function "03 - Final control diagnosis".

Actuation of headlight lowering

•     A -    1st control element being tested
•     1 -    Headlights are lowered

• ◆ Headlights are lowered until upper end position is reached

Actuation of headlight raising

• ‒ Touch ▸ key.

→ Display on VAS 5051:

•     A -    2nd control element being tested
•     2 -    Headlights are raised

• ◆ Headlights are raised until upper end position is reached

• ‒ Touch ▸ key.

→ Display on VAS 5051:

•     A -    Control element test over

• ‒ Terminate function "03 - Final control diagnosis" by touching ◂ key.