audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing telephone transmitter and receiver unit R36 (up to MY 99) > < Removing and installing handset with holder

A3 Mk1

Removing and installing handset cradle with holder
   
Removing and installing handset cradle with holder

–  Switch off all electrical equipment.
–  Remove ignition key.
Removing:
–  Detach mobile phone -1- from handset cradle -2-.
–  Detach handset cradle -2- from adapter cradle -5- and unplug connector -3- at holder -6-.
–  Screw out bolts -4- (2 Nm) and detach adapter cradle -5-.
–  Screw out bolts -7- (2.5 Nm), detach holder -6- and unclip connector of telephone wiring harness -8-.
Installing:
–  Install accordingly in reverse order of removal.
   

Removing and installing telephone transmitter and receiver unit R36 (up to MY 99) > < Removing and installing handset with holder