| The "Adaption" function can be used to make and store the following changes: |
| t
| Changes to number of ABS wheel sensor pulses |
| t
| Disabling/enabling of production diagnosis |
| t
| Colour or black-and-white dash panel insert display |
| t
| Changes to country identification |
| t
| Connection of telematics system |
| t
| Connection of electronic log book |
| Additional features as of week 45/01 (version RNS 4.2): |
| t
| Adaption of CAN bus users (fitting list) |
| t
| Changes to front passive loudspeaker diagnosis |
| This adaption does not have to be performed. Make sure that “0” is set in channel 9. |
| t
| Deactivating/activating transportation mode |
| If transportation mode is active, unit is switched off 10 seconds after being switched on. “TRANSPORTATION MODE” appears on display. |
| Transportation mode may be active in new vehicles on delivery. |
| Navigation system II-D uses ABS sensor pulses to calculate distance travelled. |
| The individual functions are called up by way of the appropriate adaption channel number (adaption table → Chapter). |
|
|
|
