Audi Workshop Service and Repair Manuals > A3 Mk1 > Vehicle electrics | Radio, Telephone and Navigation System, Self-diagnosis | Self diagnosis, V.A.G Inspection Service | Self-diagnosis of navigation system III (as of week 29/99)

Interrogating fault memory

Note!

The fault information displayed is not constantly updated, but rather only on starting self-diagnosis or using function 05 “Erasing fault memory”.

Indicated on display:

–	Press keys 0 and 2 (02 is used to select “Interrogating fault memory” function).

Rapid data transfer                HELP

Select function XX

Indicated on display:

–	Confirm entry by pressing Q key.

The number of stored faults appears on the display.

Rapid data transfer                    Q

02 - Interrogating fault memory

Indicated on display:

The stored faults are displayed and printed out consecutively.

–	Check printout against fault table and rectify faults → Chapter.

If “No fault detected” is displayed, tester returns to initial setting after pressing → key.

X fault(s) detected

Indicated on display:

No fault detected                  ->

Indicated on display:

–	Press keys 0 and 6 (06 is used to select “End of output” function).

–	Confirm entry by pressing Q key.

–	Switch off ignition and unplug diagnostic connector.

Rapid data transfer                HELP

Select function XX

Audi Workshop Service and Repair Manuals