audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Adapting electronic log book > < Adapting country identification

A3 Mk1

Adapting dynamic navigation
Adapting dynamic navigation
The control unit is informed of whether or not dynamic navigation is to be set and, if so, via which channels the associated information is to be obtained.
   
Indicated on display:
–  Press keys 0 and 6 (06 is used to select “Channel 6”).
  Note!
An incorrect entry can be corrected after pressing C key.
–  Confirm entry by pressing Q key.
  
Adaption
Enter channel number XX
Indicated on display:
Channel selected and relevant configuration are displayed on top line.
0 = Without dynamic function
1 = Dynamic function via Symphony II radio
2 = Dynamic function via Telematics II
3 = Dynamic function via Symphony II radio and Telematics II
–  Press → key.
  
Channel 6     Adaption      0        ->
                          <-1 3->
Indicated on display:
–  Enter new adaption value (e.g. 00001).
0 = Without dynamic function
1 = Dynamic function via Symphony II radio
2 = Dynamic function via Telematics II
3 = Dynamic function via Symphony II radio and Telematics II
–  Confirm entry by pressing Q key.
  
Channel 6     Adaption      0        ->
Enter adaption value XXXXX
Indicated on display:
–  Press → key.
  
Channel 6     Adaption      1        ->
                          <-1 3->
Indicated on display:
–  Confirm entry by pressing Q key.
  
Channel 6     Adaption      1         Q
Store altered value?
Indicated on display:
–  Press → key.
  
Channel 6     Adaption      1        ->
Altered value stored
Indicated on display:
–  Press keys 0 and 6 (06 is used to select “End of output” function).
–  Confirm entry by pressing Q key.
  
Rapid data transfer                HELP
Select function XX

Adapting electronic log book > < Adapting country identification