Technical requirements for retrofitting different wheel/tyre combinations |
l
| The wheel/tyre combinations and conversions listed in the tables for the individual models refer exclusively to Audi Genuine wheels/rims. |
l
| It is not possible to approve wheel/tyre combinations or conversions for wheels/rims from accessories dealers with the tyre approval certificate. |
l
| Tubeless radial tyres may only be fitted to rims with a safety hump feature on the shoulder (e.g. round hump). |
l
| Run-flat tyres (with reinforced side wall) must only be fitted on wheels with extended hump and vehicles with tyre pressure monitoring. |
l
| The correct tyre pressures must be observed when the specified wheel/tyre combinations are used. The tyre pressures for summer tyres are indicated on the sticker inside the fuel tank flap and in the tables for the individual vehicles. |
l
| Sufficient clearance between the wheels/tyres and the wheel housings, suspension and brake system components is ensured under all operating conditions if the instructions and conditions specified in the approval certificate are observed. |
l
| Unless specified otherwise, snow chains may only be fitted on the driven wheels. On four-wheel drive vehicles, snow chains may only be fitted on the front wheels (exception: rear wheels also on Audi Q5). |
|
|
|