audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Cleaning air conditioner evaporator > < Component group "2"

A3 Mk2

Removing and installing dash panel vent
Removing and installing dash panel vent
  Note
   
t  The dash panel vents -B- can only be removed and installed with the actuating ring -A- in the „45°“ position. This is the only position in which the vent actuating arms are set such that the vent can be removed from the dash panel and installed without damage.
t  The dash panel vents -B- can only be installed in a certain position. Attention is therefore to be paid on installation to the position of the actuating ring -A-.
–  Move the actuating ring -A- of the dash panel vent -B- to be removed to the „45°“ position.
  A87-0650
–  Apply the hook -3438--A- for example to the rear end -C- of the dash panel vent -B-.
  Caution
To avoid damaging the dash panel vent on removal, do not engage the hook -3438--A- at the slats of the dash panel vent -B-.
–  Carefully pull the appropriate dash panel vent -B- out of the dash panel.
  A87-10260

Cleaning air conditioner evaporator > < Component group "2"