A3 Mk2
Exploded view - selector mechanism on vehicles from model year 2008 onwards |
Note
Lubricate bearings and moving surfaces with grease -G 000 450 02-. |
1 - | Floor plate |
q | Bend tabs open to remove |
q | Always renew |
2 - | Gasket |
q | Renew |
3 - | Gear lever |
q | Can be removed and installed without removing gear lever guide → Item |
4 - | Damping washer |
q | Push onto gear lever as far as stop -arrow- |
5 - | Retaining clip |
q | Renew |
6 - | Gate selector cable |
q | Lever off gate selector lever |
q | Press onto gate selector lever inside selector mechanism |
q | Installation position → Chapter |
7 - | Bush |
8 - | Gear selector cable |
q | Lever off gear lever guide |
q | Press onto gear lever guide inside selector mechanism |
q | Installation position → Chapter |
9 - | Damper |
10 - | Bearing shell |
q | Will be damaged during removal |
q | Renew |
11 - | Bush |
12 - | Securing clip |
q | Removing and installing → Fig. |
13 - | Spring |
14 - | Bush |
15 - | Gear lever guide |
16 - | Nut |
l | M6 - 8 Nm |
l | M8 - 25 Nm |
q | 4x |
17 - | Gasket |
q | Between selector housing and floor |
q | Self-adhesive |
q | Glue onto selector housing |
18 - | Selector housing |
q | With spring and gate selector lever |
q | Spring and gate selector lever cannot be detached |