Audi Workshop Service and Repair Manuals > A3 Mk2 > Power unit | 4-cylinder direct petrol injection engine (1.8 ltr., 2.0 ltr. 4-valve turbo), mechanics | Enginecrankshaft group, pistons | Crankshaft | Extracting and driving in needle bearing for crankshaft

Extracting and driving in needle bearing for crankshaft

Vehicles with DSG® (dual clutch gearbox) only

Special tools and workshop equipment required

t	Puller -T10055- with adapter -T10055/3-

t	Centring mandrel -3176- or drift -VW 207 C-

t	Puller e.g. Kukko -21/2-

Removing:

–	Extract with commercially available puller e.g. Kukko -21/2--arrow-, adapter -T10055/3- and puller -T10055-.

Installing:

Note

The lettering on the needle bearing must be visible when installed.

–	Drive in with drift -VW 207 C- or centring mandrel -3176-.

Installation depth of -a- = 2 mm

Audi Workshop Service and Repair Manuals