Note | t
| Secure all hose connections with the correct type of hose clips (same as original equipment). |
| t
| Hose connections and hoses for charge air system must be free of oil and grease before assembly. However (applies only to plug-in connectors); the seal and the sealing surface of plug-in connectors should be lubricated lightly with oil → Chapter. |
| t
| Charge air system must be free of leaks. |
| t
| Renew self-locking nuts. |
| t
| Hose clip pliers -VAS 6362- or hose clip pliers -V.A.G 1921- are recommended for use when installing spring-type clips. |
| t
| Fill turbocharger with engine oil at connection for oil supply pipe. |
| t
| After installing turbocharger, allow engine to idle for approx. 1 minute and do not rev up immediately to ensure turbocharger is supplied with oil. |
|
|
|
