A3 Quattro L4-2.0L Turbo (CBFA) (2009)
‹› The notch on the vibration damper must line up with the arrow marking on the timing chain lower cover.
-
Remove vibration damper bolt using Counterhold ( T10355).
-
Remove the vibration damper.
‹› To avoid damaging the splines, only install the vibration damper bolt with the Thrust Piece (T10368).
-
Install the vibration damper bolt and Thrust Piece (T10368).
CAUTION!
The engine could be destroyed.
‹› In order not to change the valve timing, the crankshaft must not be moved out of the "OT" position when the vibration damper bolt is
removed.
-
Remove the idler roller - 1 -.
-
Tighten the Lifting Eye (2024 A /2) on the engine lifting eye using a collar nut - arrow -.