A3 Quattro V6-3.2L (BUB) (2008)
/Page-100002.png)
CAUTION.
Risk of destroying electronic components with static discharge.
‹› To discharge static, touch vehicle ground with hand (while not wearing gloves).
-
Disconnect electrical connector - 2 -.
-
Remove bolt - 1 -.
-
At Steering Column Electronic Systems Control Module (J527), slide a dia. 2.5 mm drill - item 2 - approximately 45 mm into the hole - arrow 1 -,
releasing the retaining detente - arrow 2 -.
-
Pull Steering Column Electronic Systems Control Module (J527) down slightly and remove drill.
-
Release retaining clip - arrow - on connector side of Steering Column Electronic Systems Control Module (J527 ) and remove control module
from steering column switch module.
