A3 Quattro V6-3.2L (BUB) (2008)
Removing
-
Remove Steering Angle Sensor G85.
NOTE:
-
he following work procedures are shown with the steering column switch module removed.
-
Release retaining clips with 1.0 mm feeler gauge - item 1 - - arrows - and remove left lever switch.
Installing
Install in reverse order of removal, noting the following:
-
Make sure all fasteners and electrical connectors are properly engaged.
Windshield Wiper/Washer Switch
Removing
-
Remove Steering Angle Sensor G85 .
NOTE:
-
The following work procedures are shown with the steering column switch module removed.
-
Release retaining clips with 1.0 mm feeler gauge - item 1 - - arrows - and remove Windshield Wiper/Washer Switch E22 .
Installing
Install in reverse order of removal, noting the following:
-
Make sure all fasteners and electrical connectors are properly engaged.