A3 Quattro V6-3.2L (BUB) (2008)
/Page-2254002.png)
Replacement/Front Suspension/Diagonal Braces.
-
Remove bracket for exhaust system from the subframe.
-
Remove coupling rods from stabilizer.
-
Remove nuts - arrows -.
-
Loosen nut of tie rod ball joint, but do not remove yet.
-
Press tie rod end off of wheel bearing housing using ball joint puller (3287 A).
-
Subframe with Brackets, Securing, refer to => [ Subframe and Consoles, Securing ] See: Subframe/Front Subframe/Service and
Repair/Procedures/Subframe and Consoles, Securing.
-
Remove stabilizer bar from subframe - 11 and 16 -.
