A3 Quattro V6-3.2L (BUB) (2008)
CAUTION:
Danger of damaging the paint.
-
Protect the fender from scratches with adhesive tape.
-
Disconnect electrical connector - 2 -.
-
Remove bolts - 1 - and - 3 -.
-
Lift the wiper arm frame with the linkage and wiper motor and remove it toward the left and out of the plenum chamber.
Installing
Install in reverse order of removal, noting the following:
-
Install wiper motor with wiper frame in vehicle.
-
Adjust wiper arms .
Tightening Specifications
Component
Nm
Wiper frame to plenum chamber
8 Nm