A4 Cabriolet L4-2.0L Turbo (BWT) (2007)
/Page-2260003.png)
-
When installing clutch pedal starter interlock switch, press clutch pedal - 1 - all the way down - arrow A -. Hold clutch pedal in this position.
-
Guide clutch pedal starter interlock switch - 2 - through opening in retainer, and at the same time push operating rod against clutch pedal and
secure switch by turning it 45° in the direction indicated - arrow B -.
-
Connect electrical connector - 3 - on clutch pedal starter interlock switch.
-
Install storage compartment on drivers side.
