A4 Cabriolet Mk2
Removing and installing scuttle panel trim |
1 - | Scuttle panel trim |
q | Removing: |
– | Remove the wiper arms → Rep. Gr.92. |
– | Remove plenum chamber cover. |
– | Detach locking elements → Item. |
– | Pull trim out of fastening strip at bottom of windscreen. |
– | Lift out trim. |
q | On installation, make sure trim is fully engaged in fastening strip. |
2 - | Support |
3 - | Windscreen |
4 - | Locking element |
5 - | Plenum chamber cover |
q | Detach the seal → Item and pull the cover out of the scuttle panel trim. |
6 - | Seal |