audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing convertible top box lid, top switch F201 > < Removing convertible top position switch ( convertible top stowed switch F171 / convertible top front switch F202 )

A4 Cabriolet Mk2

Removing convertible top tensioner position senderG356
Removing convertible top tensioner position sender -G356-
   
–  Move convertible top to centre position.
  A61-0265
–  Unplug the connector at the convertible top tensioner position sender -G356--3-.
–  Remove the bolt -B- and pull the sender -3- carefully out of its mounting hole.
Install in reverse order.
  Note
On installation, make sure sender is slipped over drive pin of convertible top linkage.
Tightening torque → Fig.
  A61-10020

Removing convertible top box lid, top switch F201 > < Removing convertible top position switch ( convertible top stowed switch F171 / convertible top front switch F202 )