A4 Cabriolet Mk2
Removing and installing side trim (sill side) |
1 - | Backrest |
2 - | Bolts (4x) |
3 - | Backrest adjuster |
4 - | Plastic rivet (2x) |
q | Renew |
5 - | Seat height adjuster |
6 - | Side trim (sill side) |
t | Removing |
– | Remove seat → Chapter. |
– | Attach seat repair stand -VAS 6136- to engine and gearbox support -VAS 6095-. |
– | Attach front seat to seat repair stand -VAS 6136-. |
– | Remove backrest adjuster → Chapter. |
– | Remove seat height adjuster → Chapter. |
– | Apply screwdriver to head of plastic rivet -4-. |
– | Twist screwdriver to prise out plastic rivet -4-. |
– | Release second plastic rivet -4- in the same manner. |
– | Pull off side trim (sill end) -6-. |
t | Installing |
– | Install side trim (sill end) -6- in reverse order of removal. |
7 - | Connector (3x) |
8 - | Seat pan |
9 - | Side trim (tunnel side) |
10 - | Plastic rivet (2x) |