Indicated on display of vehicle diagnostic, testing and information system -VAS 5051A-: |
t
| Display zone -1- indicates “Store channel 08”. |
t
| New value for this adaption channel appears in area -2-. |
t
| Original and new code number for this adaption channel appear in area -3-. |
–
| Adopt and store entry by touching key -4-. |
t
| Display zone -1- indicates “Store channel X, value 0.....XXXX stored”. |
Note t
| With certain auxiliary heater control units -J364-, rounding errors on conversion following entry of the coded display value, e.g. “30” may cause the following display to appear “Note: Value to be stored 30, value actually stored 29”. If this display appears, enter e.g. “31” instead of “30” if necessary to store the exact value and confirm display by touching OK key. |
t
| Code numbers entered which are not within specified limits are displayed but not implemented. |
t
| If code number entered is too high or too low, display is automatically reset (to lowest or highest value still permitted). |
–
| Touch ← key (to return to selection program). |
Indicated on display of vehicle diagnostic, testing and information system -VAS 5051A-: |
–
| Select function “04 - Basic setting”. |
Indicated on display of vehicle diagnostic, testing and information system -VAS 5051A-: |
t
| Prompt for entering display group appears in display zone -1-. |
t
| Input keypad appears in display zone -2-. |
–
| Use input keypad in display zone -2- to enter “077” for display group number “77” and confirm by touching “Q” key. |
|
|
|