t
| If display zone -1- indicates “Disabled”, adaption function is currently not available due to having been incorrectly implemented several times. |
t
| Wait for completion of disable time. |
Indicated on display of vehicle diagnostic, testing and information system -VAS 5051A-: |
t
| Display zone -1- indicates “Channel XX reading and testing”. |
t
| There is no display in area -2- at present. |
t
| A bar appears in area -3- (not to be used for this application). |
–
| Touch key -4- (for entry via keypad). |
Indicated on display of vehicle diagnostic, testing and information system -VAS 5051A-: |
t
| Display zone -1- indicates “Enter adaption value: 0....XXXXX”. |
t
| Input keypad appears in display zone -2-. |
–
| Use input keypad to enter the desired value for this adaption channel in the display zone (List of available adaption channels) → Chapter for re-adaption of the auxiliary heater control unit -J364-. |
Note t
| Code numbers entered via keypad which are not within specified limits are displayed but not implemented. |
t
| If keypad is used to enter a code number which is too high or too low, display returns automatically to initial value or to lowest/highest permissible value. |
t
| Code number entered appears in area -2-. |
–
| Confirm entry by touching Q key. |
Indicated on display of vehicle diagnostic, testing and information system -VAS 5051A-: |
t
| New value for this adaption channel appears in area -2-. |
t
| Code number entered appears above bar in area -3-. |
–
| Store entry by touching key -5-. |
|
|
|