Checking and servicing release bearing with glued plastic ring |
Identification: inner side of plastic ring has three lugs -arrows-. |
The plastic ring -arrows- may come loose from the release bearing when the gearbox or release bearing is removed. The release bearing does not have to be renewed if this happens. |
–
| Before installing the gearbox, glue the loose plastic ring back onto the bearing with adhesive -AMV 195 KD1 01-. |
The three square lugs -arrows- on the plastic ring engage in the recesses of the bearing ring. |
l
| The release bearing must be renewed if the groove worn on the plastic ring is deeper than 0.8 mm. |
|
|
|