A4 Cabriolet Mk2
Removing and installing sump and balance shaft assembly |
Special tools and workshop equipment required |
t | Support bracket -10-222 A- |
t | Shackle -10 - 222 A/12- |
t | Used oil collection and extraction unit -V.A.G 1782- |
t | Workshop hoist -VAS 6100- or workshop hoist -V.A.G 1202- |
t | Locking pin -T10060 A- or -T10060- |
t | Mud wing compensation plate -T40045- |
t | Electric drill with plastic brush attachment |
t | Safety goggles |
t | Sealant → Parts catalogue |
Note
|
|
Note
|
|
|
|
|
|
|
|
|
|
|
|
|
Note
|
|
|
|
|
|
Note
|
|
|
|
Note
|
Note
|
|
|
|
|
|
|
|
Note
|
Note
|
Note
|
|
|
Note
|
|
|
|
|
|
Note
|
|
Component | Nm | |||||
Balance shaft assembly | 15 + 90° 1)2) | |||||
Oil pump chain sprocket | 20 + 90° 1)2) | |||||
Oil pipe to balance shaft assembly | 10 | |||||
Sump to cylinder block | M7 | 15 | ||||
M10 | 40 | |||||
Sump to gearbox | 45 | |||||
Intake manifold support to sump | 23 | |||||
Torque reaction support to sump | 23 | |||||
Oil drain plug | 30 | |||||
Engine mounting to console for engine mounting | 23 | |||||
|