Audi Workshop Service and Repair Manuals > A4 Cabriolet Mk2 > Power unit | 8-cylinder engine (4.2 ltr. 5-valve with timing chains), mechanics | Engine lubrication | Removing and installing parts of lubrication system | Removing and installing oil pressure switch F1

Removing and installing oil pressure switchF1

Removing and installing oil pressure switch -F1-

Removing

–	Pull off rear engine cover panel -arrows-.

–	Unplug electrical connector -arrow- at oil pressure switch.

–	Unscrew oil pressure switch.

Installing

Installation is carried out in the reverse order; note the following:

Note

Renew seal.

Tightening torque

Component	Nm
Oil pressure switch to oil filter housing	25

Audi Workshop Service and Repair Manuals