Remove cover panel at right of fuel tank -arrows-.
–
Place drip tray below fuel filter.
WARNING
The fuel system is pressurised. Before opening the system place a clean cloth around the connection. Then release pressure by carefully loosening the connection.
–
Disconnect fuel pipes -1- and -3- by pressing the release tabs.
–
Remove bolt -2-.
–
Remove fuel filter.
Installing
Installation is carried out in the reverse order; note the following:
Installation position:
l
Flow direction is marked with arrows on filter housing.
l
Arrows -1- and -2- must be face each other.
Distance between fuel return pipe at fuel filter and fuel tank: