A4 Cabriolet Mk2
| Intake manifold - exploded view |
| 1 - | Bolt |
| q | 22 Nm |
| 2 - | Lifting eye |
| 3 - | Bolt |
| q | 22 Nm |
| q | Tighten in stages and in diagonal sequence |
| 4 - | Gasket |
| q | Renew |
| 5 - | Intake manifold |
| q | Removing and installing → Chapter |
| 6 - | Bracket |
| q | For wiring harness |
| 7 - | Bolt |
| q | 22 Nm |
| 8 - | Gasket |
| q | Renew |
| 9 - | Gasket |
| q | Renew |
| 10 - | Connecting pipe for exhaust gas recirculation |
| 11 - | Bolt |
| q | 22 Nm |
| 12 - | Seal |
| q | Renew if damaged or leaking |
| 13 - | Air intake hose to charge air cooler |
| 14 - | Bolts |
| q | 10 Nm |
| q | 3x |
| 15 - | Intake manifold flap motor -V157- |
| 16 - | O-ring |
| q | Renew |
| 17 - | Exhaust gas recirculation valve -N18-/exhaust gas recirculation potentiometer -G212- |
