audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing sender wheel for engine speed sender G28 > < Removing and installing intake manifold

A4 Cabriolet Mk2

Removing and installing engine speed senderG28
Removing and installing engine speed sender -G28-
Special tools and workshop equipment required
   
t  Assembly tool -T10118-
  W00-1148
Removing
–  Remove oil filter bracket → Rep. Gr.17.
–  Unplug electrical connector at engine speed sender -G28--arrow- using assembly tool -T10118-.
  Note
To release electrical connector without assembly tool -T10118-, press connector on engine speed sender in with a screwdriver and at the same time lift release tab with a thin wire hook.
–  Move wiring clear.
  A23-0205
–  Unscrew securing bolt -2- for engine speed sender -G28--item 1-.
Installing
Installation is carried out in the reverse order; note the following:
–  Install oil filter bracket → Rep. Gr.17.
Tightening torque
  A23-0209
ComponentNm
Engine speed sender -G28- to cylinder block4.5

   

Removing and installing sender wheel for engine speed sender G28 > < Removing and installing intake manifold