Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing anti-theft alarm sensor G578 - vehicles from 07.2006 onwards >
< Removing and installing interior monitor send and receive module 1 G303
A4 Cabriolet Mk2
Vehicle electrics
Electrical system
Lights, lamps, switches inside, anti-theft system
Ultrasonic interior monitoring
Removing and installing interior monitor send and receive module 2 G305 - vehicles up to 06.2006
Removing and installing interior monitor send and receive module 2G305 - vehicles up to 06.2006
Removing and installing interior monitor send and receive module 2 -G305- - vehicles up to 06.2006
Removing
–
To renew control unit, select the “Replacement” function for the appropriate control unit in “Guided Functions” mode
→ Vehicle diagnosis, testing and information system VAS 5051
.
–
Switch off ignition and take out ignition key.
–
Remove centre console
→ Rep. Gr.68
.
–
Remove bolt
-3-
.
–
Release the retaining clip
-arrow-
and pull the interior monitor send and receive module 2 -G305-
-item 2-
upwards out of the retainer.
–
Unplug electrical connector
-1-
.
Installing
Installation is carried out in the reverse order; note the following:
–
Install centre console
→ Rep. Gr.68
.
Tightening torque
Component
Nm
Interior monitor send and receive module 2 -G305- to body
2
Vehicle electrics
Electrical system
Lights, lamps, switches inside, anti-theft system
Ultrasonic interior monitoring
Removing and installing interior monitor send and receive module 2 G305 - vehicles up to 06.2006
Removing and installing anti-theft alarm sensor G578 - vehicles from 07.2006 onwards >
< Removing and installing interior monitor send and receive module 1 G303