audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing intermittent wiper switch E22 > < Removing and installing turn signal switch E2

A4 Cabriolet Mk2

Removing and installing switch for cruise control systemE45
Removing and installing switch for cruise control system -E45-
   
Removing
–  Remove steering column switch module → Chapter.
  Note
Return ring with slip ring must be removed/installed in centre position (wheels in straight ahead position).
–  Carefully release retaining hooks -arrows-.
–  Detach return ring with slip ring -2- with steering angle sender -G85--item 1- from steering column switch module.
  A94-10264
–  Unscrew bolts -arrows-.
–  Detach steering column electronics control unit -J527--item 2- from steering column switch module.
–  Detach cruise control system switch -E45--item 1- at steering column switch module.
Installing
Further installation is carried out in the reverse order; note the following:
–  Make sure all fasteners and the electrical connectors are properly engaged.
–  Install steering column switch module → Anchor.
Tightening torques
  A94-10024
ComponentNm
Steering column switch module to steering column electronics control unit -J527-0.65
Intermittent wiper switch -E22- to steering column electronics control unit -J527-0.65
Switch for cruise control system -E45- to steering column electronics control unit -J527-0.65

   

Removing and installing intermittent wiper switch E22 > < Removing and installing turn signal switch E2