Audi Workshop Service and Repair Manuals

• Bolt (2x)
• ◆ Tightening torque 9.5 Nm.
• Lock base plate
• Door lock
• ◆ Removal:
• ‒ Remove door component carrier =>Page 57-1.

Note:

If the trim cap for door lock has not been fitted, door component carrier does not have to be removed to take out door lock.

• ‒ Remove cover for door lock =>Page 57-14.
• ‒ Unclipping securing and operating rods =>Page 57-16.
• ‒ Detach connecting hose from actuator for central locking system.
• ‒ Unscrew bolts -1-.
• ‒ Remove door lock and lock base plate -2-.

• ◆ Installation:
• ‒ Install in reverse order.

• Bowden cable for interior door handle.
• ◆ Removal:
• ‒ Remove door component carrier =>Page 57-1.
• ‒ Remove cover for door lock =>Page 57-14.
• ‒ Release Bowden cable (shown released in magnified view), unclip downwards and disengage from door lock.
• ◆ Installation:
• ‒ Install in reverse order.