Audi Workshop Service and Repair Manuals

• Backrest
• Seat side panel, tunnel side

Note:

Removal of seat side panel on tunnel side does not involve detaching any electrical connections. Otherwise, removal is similar to removing seat side panel on sill side.

• Bracket for seat side panel, tunnel side
• Seat frame
• Bolt (4x per trim panel)
• Bracket for seat side panel, sill side

• Seat side panel, sill side

• ◆ Removing
• ‒ Move seat down as far as possible.
• ‒ Remove seat
• ‒ Remove fitting panel => Page 72-94
• ‒ Remove seat cushion => Page72-78
• ‒ Swivel down belt buckle.
• ‒ Detach all electrical connectors to circuit board in seat side panel on sill side.
• ‒ Use side-cutting pliers to cut through all cable ties at wiring harness.
• ‒ Slacken off bolts -5- (4x) at seat side trim.

• ◆ Installing
• ‒ Engage trim at bottom part of backrest frame fitting.
• ‒ Attach seat side trim with bolts -5- (4x).