Audi Workshop Service and Repair Manuals

Removing

• ‒ Remove the air flow flap positioning motor -V71 .

• ‒ → Disconnect the intake housing -A- from the evaporator housing => Page 87-166.
• ‒ Press the two lugs back -B- and remove both mounts.
• ‒ Remove the air-flow flap -C-

Installing

Installation is carried out in the reverse order; note the following:

• ‒ Insert the air-flow flap at the correct side:
• ‒ The longer side of the air-flow flap faces in the direction of travel and the teeth of the mount point downwards.