Audi Workshop Service and Repair Manuals

Removing

• ‒ Drain the refrigerant circuit

=> Air conditioner - with refrigerant R134a

• ‒ → Screw out the bolts -A- (15 Nm).
• ‒ Remove the refrigerant lines from the evaporator.

Note:

Cap -C-, an evaporator spare part, for example, is suitable for sealing the open connections on the evaporator.

Installing

Installation is carried out in the reverse order; note the following:

• ‒ → Replace the O-ring seals -A- (17.2 mm/1.8 mm) and -B- (10.8 mm/1.8 mm).
• ‒ Install the refrigerant lines with no tension.
• ‒ Check that the grommet -D- is seated correctly.