Audi Workshop Service and Repair Manuals

Removing

• ‒ Remove the glove box

=> General Body Assembly, Interior; Repair group 68; Storage compartments/covers; Removing and installing glove box

• ‒ → Detach connector -A-.
• ‒ Remove bolt -B-.
• ‒ Remove positioning motor -C- in the direction of the arrow.

Installing

Installation is carried out in the reverse order; note the following:

• ‒ When inserting the positioning motor, ensure that the bracket -D- is correctly positioned in slot -E-.
• ‒ Install the positioning motor.
• ‒ If the lever is positioned so unfavourably that the motor cannot be installed, inserted connector -A-.
• ‒ Switch the ignition on.

• ‒ → Now actuate the fresh-air/recirculated-air flap until the lever -F- on the positioning motor is in the centre position.